
Add to Cart
Water Cooled Power Cable SDL Series High Temperature Resistant
Structure of SDL Water Cooled Cable
Internal Structure of SDL Series SDL-2 Series (High Temperature Resistant)
Picture 1. Picture 2.
Structure Schematic Diagram of SDL Series Water Cooled Cable
Picture 3.
1) Protection Sleeve
2) Rubber Pipe
3) Copper Twist Wire
4) Core Pipe
5) Stainless Hoop
6) Conduction Joint
1.3 Specification
Picture 4.
4 Requirements of Application
1.4.1 Permitted current density: <4.5 A/mm2
1.4.2 Cooling water: Working pressure: 0.20-0.35 MPa
Water-inlet temperature: <35℃
Water-outlet temperature: <55℃
5. Quality of cooling water:
PH figure: 7-9
Hardness: <10 (Germany)
Electrical resistivity: >25×102Ω.Cm
Total content of non-dissolved solids: <250mg/t
SDL SPECIFICATION
Table II
Model | Conductor | A | B | C | m | S | t | E | ZG | ΦV | ΦD | n×Φd | Cooled Water m3/h | Curved radius | Capa-city A | |
Fmm2 | GMR | |||||||||||||||
SDL3000 | 6×500 | 39 | 240 | 60 | 65 | 40 | 25 | 50 | 3”/4 | 125 | 127 | 6×22 | 0.6 | 480 | 13500 | |
SDL3200 | 8×400 | 49 | 245 | 65 | 70 | 40 | 30 | 55 | 3”/4 | 139 | 142 | 6×22 | 0.8 | 490 | 14400 | |
SDL3600 | 9×400 | 51 | 65 | 60 | 40 | 30 | 55 | 1” | 143 | 146 | 8×20 | 0.9 | 580 | 16200 | ||
SDL4000 | 8×500 | 52 | 285 | 70 | 65 | 40 | 30 | 60 | 1” | 149 | 152 | 8×22 | 0.9 | 650 | 18000 | |
SDL4500 | 9×500 | 55.5 | 300 | 70 | 65 | 40 | 30 | 60 | 1” | 156 | 159 | 8×22 | 1 | 660 | 20250 | |
SDL5000 | 10×500 | 72 | 300 | 80 | 70 | 40 | 30 | 60 | 1” | 189 | 192 | 8×22 | 1 | 700 | 22500 | |
SDL5500 | 11×500 | 72 | 315 | 85 | 70 | 40 | 30 | 65 | 1” | 189 | 192 | 8×24 | 1.1 | 750 | 24750 | |
SDL6000 | 12×500 | 77 | 320 | 90 | 70 | 45 | 30 | 70 | 1” | 200 | 203 | 8×24 | 1.2 | 800 | 27000 |