BEIJING SINO STEEL ENGINEERING & EQUIPMENT CO., LTD.
Beijing Sino Steel Engineering & Equipment Co., Ltd. Building Our Future Together
Add to Cart
Copper mould tube for CCM Square rectangular round H-beam plate
Situated in a critical position of continuous casting machine, copper mould requires extreme high thermal-conductivity and high strength. The molten steel will be formed into a certain shaped steel billets immediately after it passes through the copper mould.
Besides basic function of shaping and solidifying the steel strand, copper mould is of great influence on the economics of continuous casting lines.
Not only the cost, the service life of copper mould and the quality of the cast product are also considered as important factors by the users.
Therefore, suitable mould design as well as study of continuous casters and working conditions is making stringent demands on the manufacturers.
Rectangular Mould
|
No. | Length (mm) | Section Dimension (mm) | Curved Radius (mm) | Wall Thickness (mm) | Outer Corner Radius (mm) | Inner Corner Radius (mm) | Cr-Coating Thickness (mm) |
| 1 | 800 | 130×240 | 5000 | 14 | 22 | 8 | 0.06~0.08 |
| 2 | 812 | 130×240 | 5250 | 14 | 24 | 10 | 0.06~0.08 |
| 3 | 700 | 150×180 | 6000 | 12 | 24 | 12 | 0.06~0.08 |
| 4 | 780 | 150×220 | 4560 | 14 | 29 | 15 | 0.06~0.08 |
| 5 | 812 | 150×220 | 6000 | 14 | 20 | 10 | 0.13 |
| 6 | 812 | 150×220 | 6000 | 14 | 20 | 6 | 0.13 |
| 7 | 812 | 150×220 | 7000 | 14 | 24 | 10 | 0.09~0.12 |
| 8 | 700 | 160×200 | 6000 | 14 | 29 | 15 | 0.06~0.08 |
| 9 | 810 | 160×200 | 6000 | 14 | 29 | 15 | 0.06~0.08 |
| 10 | 812 | 180×220 | 7000 | 12 | 20 | 8 | 0.13 |
| Material | Chemical Composition | Mechanical Properties | Electric Conductivity (%IACS) | ||||
| Cu | Others | Tensile Strength σ b (N/mm2) | Yield Strength σ 0.2 (N/mm2) | Elongation | Hardness (HB) | ||
| E-Cu | ＞99.90 | 200 | 40 | 40 | 45 | 98 | |
| SF-Cu | ＞99.85 | P0.015-0.040 | 240-310 | 190-250 | 25-10 | 80-95 | 85 |
| CuAg | ＞99.50 | Ag0.08-0.12 | 240-310 | 200-225 | 16-10 | 110-125 | 95 |
| Cu-Cr-Zr | ＞98.0 | Cr0.3-1.2 | 375-445 | 280-355 | 20-13 | 115-130 | 80 |
Product Scope:
| 21 | 1000 | □135×135 | 6000 | 10 | 20 | 10 | 0.06~0.08 |
| 22 | 810 | □135×135 | 5250 | 12.3 | 18.3 | 6 | 0.07~0.09 |
| 23 | 780 | □140×140 | 7000 | 11 | 16 | 6 | 0.06~0.08 |
| 24 | 801 | □140×140 | 10250 | 12 | 18 | 6 | 0.06~0.08 |
| 25 | 812 | □140×140 | 8000 | 12.3 | 20 | 8 | 0.10 |
| 26 | 835 | □140×140 | 7924.8 | 12.5 | 17 | 6 | 0.10~0.12 |
| 27 | 800 | □143×143 | straight | 11 | 21 | 10 | 0.06~0.08 |
| 28 | 700 | □150×150 | 9000 | 12 | 20 | 8 | 0.08~0.10 |
| 29 | 780 | □150×150 | 6000 | 12.5 | 18 | 5 | 0.08~0.10 |
| 30 | 780 | □150×150 | straight | 10 | 22 | 12 | 0.06~0.08 |
| 31 | 800 | □150×150 | 5250 | 12 | 20 | 8 | 0.08~0.10 |
| 32 | 810 | □150×150 | 6000 | 12 | 22 | 10 | 0.06~0.08 |
| 33 | 812 | □150×150 | 5250 | 15 | 27 | 12 | 0.06~0.08 |
| 34 | 812 | □150×150 | 8000 | 12 | 18 | 6 | 0.13 |
| 35 | 850 | □150×150 | 6000 | 12 | 20 | 8 | 0.06~0.08 |
| Material | E-Cu, SF-Cu (DHP Cu), CuAg, Cu-Cr-Zr |
| Design | Square, rectangular, round , plate, H beam |
| Straight or curved | |
| Outer contour parallel | |
| Internal geometries: parallel, single tapered, double tapered, multi-tapered, parabolic tapered, convex tapered | |
| Size | Square: □ 80mm~500mm |
| Coating | Coating material: Cr, Ni-Cr, Ni-Fe or Ni-co |
