BEIJING SINO STEEL ENGINEERING & EQUIPMENT CO., LTD.
Beijing Sino Steel Engineering & Equipment Co., Ltd. Building Our Future Together
Add to Cart
CCM Continuous Casting Machine Rectangle section size 330x360 mm
1.1:Main parameters
Type of the CCM
Arc type billet CCM
Radius of the arc R=6000mm
Flow QTY 3 device, 3 flow
Distance between flows 1200mm
Billet size 120*120mm 150*150mm φ110-φ160mm
Billet length 3.7-12m
Support type for ladle ladle rotation platform
tundish QTY 2set
Tundish type, capacity 12t
Cylinder control plug on/off type, capacity 12T
Type of Crystallizer structure steel pipe with water jacket
Guide device for billet upper moveable, lower fixed
Speed of the pull/straightener 0.6-6.0m/min
Cutting type torch cutter
Billet pulling out type rail, double layer, roll over type cooling bed, billet puller
Rail speed 32m/min
Billet roll over capacity 3.2t
Steel construction platform
Supper platform level +6.700m(rail level+0.60m)
Supper platform L*W 23800*13100mm
Lower platform level +4.05mm
Length of the CCM( from base line to fixed baffle) 39680mm
1.2Main technical specification
1.2.1 Ladle rotation platform
Load capacity 2*80t (40t,40t, liquid steel 40t, ladle weight 40T)
Rotation radius 3500mm
Rotation speed normal,1r/min ,open,start/stop 0.1rpm
Rotation angle ±180°;break down±360°
Motor for rotation YZR160MB-6 AC 8.5kW 930r/min uniaxial stretch IM1001
Isolation level IP54
Rotation speed when fault 0.5rpm
Rotation angle when fault 180°
A2F63W2P1 P=10-13Mpa
Hydraulic rotation motor when fault , 471r/min N=5.2-6.8kW
Arc radius 6000mm
Billet size 120*120mm, 150*150mm,φ110-φ160mm
Length of the copper pipe spuare billet 750mm,billet size 750
round billet D800mm
Rectangle section size 330x360 mm
| Item No. | Item | Unit | Specification |
| 1 | CCM strands | 1-6 | |
| 2 | CCM type | Rigid arc R6x1~6strand | |
| 3 | CCM arc radium | m | R6 |
| 4 | Space of strands | mm | 900-1200 if install the second line |
| 5 | Crystallizer copper length | mm | 812~900 |
| 6 | Tundish capacity | t | based on design |
| 7 | Billets section size | mm | 120mm*120mm or reqiured |
| 8 | Billets length rated | m | 6.0 or reqiured |
| 9 | D-S drawing velocity | m/min | 0~5.0 |
| 10 | D-S working drawing velocity | m/min | 2~3.5 for 120mm2 sectionbillets |
| 11 | Ladle molten steel | t | 15~30/strand |
| 12 | Qualified billets rate | % | 99 |
| 13 | CCM effective working time rate | % | ~95 |
| 14 | CCM productivity | t/a | 50000~100000/strand |
