BEIJING SINO STEEL ENGINEERING & EQUIPMENT CO., LTD.
Beijing Sino Steel Engineering & Equipment Co., Ltd. Building Our Future Together
Add to Cart
Copper mould tube for CCM H beam H-blank CuAg Cu-Cr-Zr section slab
Arc radius can be from 3.5m to 14m.
The strand can be 1-6.
Kinds of billet type continuous casting machine:
60mmX60mm to 700mmX700mm, of round one from Φ80mm to Φ900mm,
slab one from 120mmX850mm to 3600mmX1000mm
The characteristics:
·Ladle turret: Straight arm type, and can be with automatic weighing device, emergency driven unit and driven by electric motor.
·Oscillator : Guided by spring steel plate, it is outside the secondary cooling chamber , far away from the high temperature zone, easy for maintance.
·Copper mold tube assembly: The products are used by well-known steel mill both at home and abroad.
·Withdrawal and straightening unit: The straightener adopts the gradually straightening technic. The rollers are driven by three-ring reducers and hydro-cylinder.
·Flame cutter: High-speed narrow slit cutter, along with the unpowered cutting car. Guidance mechanism decides the torch swing.
·Dummy bar: Rigid dummy bar or flexible dummy bar.
·Electric control system: This system uses Simens PLC control scheme, carrying on the surveillance by a computer.
Rectangular Mould
|
No. | Length (mm) | Section Dimension (mm) | Curved Radius (mm) | Wall Thickness (mm) | Outer Corner Radius (mm) | Inner Corner Radius (mm) | Cr-Coating Thickness (mm) |
| 1 | 800 | 130×240 | 5000 | 14 | 22 | 8 | 0.06~0.08 |
| 2 | 812 | 130×240 | 5250 | 14 | 24 | 10 | 0.06~0.08 |
| 3 | 700 | 150×180 | 6000 | 12 | 24 | 12 | 0.06~0.08 |
| 4 | 780 | 150×220 | 4560 | 14 | 29 | 15 | 0.06~0.08 |
| 5 | 812 | 150×220 | 6000 | 14 | 20 | 10 | 0.13 |
| 6 | 812 | 150×220 | 6000 | 14 | 20 | 6 | 0.13 |
| 7 | 812 | 150×220 | 7000 | 14 | 24 | 10 | 0.09~0.12 |
| 8 | 700 | 160×200 | 6000 | 14 | 29 | 15 | 0.06~0.08 |
| 9 | 810 | 160×200 | 6000 | 14 | 29 | 15 | 0.06~0.08 |
| 10 | 812 | 180×220 | 7000 | 12 | 20 | 8 | 0.13 |
| 11 | 812 | 180×220 | 7925 | 14 | 22 | 8 | 0.06~0.08 |
| 12 | 812 | 180×220 | 8000 | 14.5 | 22 | 8 | 0.10 |
| 13 | 700 | 200×240 | 6000 | 16 | 24 | 8 | 0.08~0.10 |
| 14 | 1000 | 235×265 | 11000 | 19 | 25 | 6 | 0.06~0.08 |
Square
| 30 | 780 | □150×150 | straight | 10 | 22 | 12 | 0.06~0.08 |
| 31 | 800 | □150×150 | 5250 | 12 | 20 | 8 | 0.08~0.10 |
| 32 | 810 | □150×150 | 6000 | 12 | 22 | 10 | 0.06~0.08 |
| 33 | 812 | □150×150 | 5250 | 15 | 27 | 12 | 0.06~0.08 |
| 34 | 812 | □150×150 | 8000 | 12 | 18 | 6 | 0.13 |
| 35 | 850 | □150×150 | 6000 | 12 | 20 | 8 | 0.06~0.08 |
| 36 | 780 | □160×160 | 7000 | 12 | 17 | 6 | 0.06~0.08 |
| 37 | 790 | □160×160 | 6000 | 14.5 | 24 | 6 | 0.10 |
| 38 | 812 | □160×160 | 6000 | 12.5 | 20 | 8 | 0.12 |
| 39 | 1000 | □160×160 | 6000 | 12 | 20 | 8 | 0.08~0.10 |
| 40 | 800 | □165×165 | 6000 | 12 | 22 | 10 | 0.06~0.08 |
| 41 | 800 | □175×175 | 6000 | 12 | 20 | 8 | 0.05~0.07 |
| 42 | 700 | □180×180 | 12000 | 14 | 22 | 8 | 0.06~0.08 |
| 43 | 801 | □180×180 | 10250 | 14.5 | 20 | 6 | 0.06~0.08 |
| 44 | 1000 | □200×200 | 6000 | 14 | 20 | 6 | 0.06~0.08 |
| 45 | 1000 | □260×260
| 10250 | 21 | 28 | 8 | 0.08~0.10 |
| 46 | 1000 | □300×300 | 12000 | 22 | 28 | 6 | 0.08~0.10 |
| NO | Supply details |
| I | Spare parts of CCM |
| 1 | Ladle turret |
| 2 | Tundish and its cover device |
| 3 | Tundish dryer |
| 4 | Tundish car |
| 5 | Steel liquid overflow tank |
| 6 | Crystallizer assembly |
| 7 | Vibration device |
| 8 | Guiding section |
| 9 | Second cooling device |
| 10 | Straightening and withdrawal device |
| 11 | Roller table before cutting |
| 12 | Flame cutter |
| 13 | Dummy bar |
| 14 | Dummy bar storage device |
| 15 | Cut-to-length device |
| 16 | Transmission roller table |
| 17 | Knock-out roller table |
| 18 | Cooling bed and pusher |
| 19 | Billet pusher |
| II | Process operation system |
| 1 | Hydraulic system |
| 2 | Water cooling system |
| 3 | Electric and instrument control system |
| 4 | Pheumatic system |
| 5 | Steam exhausted system |
| Material | Chemical Composition | Mechanical Properties | Electric Conductivity (%IACS) | ||||
| Cu (%) | Others (%) | Tensile Strength σ b (N/mm2) | Yield Strength σ 0.2 (N/mm2) | Elongation δ (%) | Hardness (HB) | ||
| E-Cu | ＞99.90 | 200 | 40 | 40 | 45 | 98 | |
| SF-Cu | ＞99.85 | P0.015-0.040 | 240-310 | 190-250 | 25-10 | 80-95 | 85 |
| CuAg | ＞99.50 | Ag0.08-0.12 | 240-310 | 200-225 | 16-10 | 110-125 | 95 |
| Cu-Cr-Zr | ＞98.0 | Cr0.3-1.2 Zr0.08-0.3 | 375-445 | 280-355 | 20-13 | 115-130 | 80 |
Product Scope:
| Material | E-Cu, SF-Cu (DHP Cu), CuAg, Cu-Cr-Zr |
| Design | Square, rectangular, round , plate, H beam |
| Straight or curved | |
| Outer contour parallel | |
| Internal geometries: parallel, single tapered, double tapered, multi-tapered, parabolic tapered, convex tapered | |
| Size | Square: □ 80mm~500mm Arc Radius: 4000-17000mm Wall thickness:6-50mm Length: 700-1000mm
Rectangular: 100-500mm×650mm Arc Radius: 4000-17000mm Wall thickness:6-50mm Length: 700-1000mm
Round: Ф110-Ф1200mm Arc Radius: 5000-17000mm Wall thickness:10-50mm Length: 700-1000mm
H-beam: Intergrated stype Arc Radius: 6000-17000mm Wall thickness:12-50mm Length: 780-1016mm
|
| Coating | Coating material: Cr, Ni-Cr, Ni-Fe or Ni-co |
