Due to its high density(13.9—14.2g/cm3),high T.R.S(2500-3200N/mm2) and good wear resistance(hardness 82-86HRA,service life is more than 15 times of traditional steel rolls.

Carbide ribbing rollers are more and more popular in reinforcement production field,your specific enquiry will be more than welcome.

Our advantages of service:

1.Sales staff beyond 5 years' in this field with good understanding and fluent english.

2.Prompt reply within 24 hours with experienced suggestions.

No.	Specifications	OD(js7)	Inner hole	Thickness(js9)	/ /	Radial runout	Face runout	Inner hole 0 (6 class) //	□	Chamfer		Blank Type
No.	Specifications	OD(js7)	Inner hole	Thickness(js9)	/ /	Radial runout	Face runout	Inner hole 0 (6 class) //	□	Inner hole	Outer circle	Blank Type
1	G155NE345	Φ155.68±0.02	Φ87.31	69.95±0.03	0.01	0.013	0.01	0.006	0.01	1.5×45°	3×45°	GH155B
2	G156NA106	Φ1.56.28±0.02	Φ87.32	69.9±0.037	0.01	0.013	0.01	0.006	0.01	1.5×45°	10×1	GH156B
3	G156NA106A	Φ156.28±0.02	Φ87.32	57.25±0.037	0.01	0.013	0.01	0.006	0.01	1.5×45°	10×1	GH156C
4	G158ND530	Φ158.75±0.02	Φ87.313	62.9±0.037	0.01	0.013	0.01	0.006	0.01	1.5×45°	8.5×5	GH158C
5	G158NA106	Φ158.75±0.02	Φ87.313	70±0.037	0.01	0.013	0.01	0.006	0.01	1.5×45°	10×1	GH158B
6	G170NE145	Φ170.66±0.02	Φ94	57.3±0.037	0.01	0.013	0.01	0.006	0.01	1.5×45°	1×45°	GH170A
7	G170NE145A	Φ170.66±0.02	Φ94	70±0.037	0.01	0.013	0.01	0.006	0.01	1.5×45°	1×45°	GH170B
8	G173NE145A	Φ173±0.02	Φ95	69.05±0.037	0.01	0.013	0.01	0.006	0.01	1.5×45°	1.5×45°	GH173A
9	G178NE145A	Φ178.3±0.02	Φ94.7	62.3±0.03	0.01	0.013	0.01	0.006	0.01	1.5×45°	1.5×45°	GH178A
10	G180NE145A	Φ180±0.03	Φ110	55	0.01	0.013	0.01	0.006	0.01	1.5×45°	1.5×45°	GH180A
11	G186NE345	Φ186	Φ87.315	71.95±0.03	0.01	0.013	0.01	0.006	0.01	1.5×45°	3×45°	GH186A
12	G206NA106	Φ206.4±0.023	Φ120.65	71.9±0.037	0.01	0.013	0.01	0.008	0.01	1.5×45°	10×1	GH206A
13	G206NA106A	Φ206.65±0.023	Φ120.66	71.7±0.037	0.01	0.013	0.01	0.008	0.01	1.5×45°	10×1	GH206A
14	G208NE345	Φ208±0.023	Φ110	71.95±0.037	0.01	0.013	0.01	0.006	0.01	2×45°	3×45°	GH208A
15	G208NS314	Φ207.97±0.023	Φ126	65.46±0.037	0.01	0.013	0.01	0.008	0.01	1.5×45°	1.5×45 12.5×3	GH208B

Product Tags:

High Density Tungsten Carbide Roll Rings and Tungsten Carbide Ribbing Roll For Profiling Wires

Electric Arc Furnace

Water Cooled Panel

Water Cooled Power Cable

CCM Continuous Casting Machine

Copper Mould Tube For CCM

Copper Mould Plate

Furnace Refractory Bricks

Chilled Cast Iron Rolls

Adamite Steel Rolls

Forged Steel Rolls

Tungsten Carbide Roll Rings

Rolling Mill Stand

Universal Joint Shaft

Speed Reducer Gearbox

High Density Tungsten Carbide Roll Rings and Tungsten Carbide Ribbing Roll For Profiling Wires

Brief introduction of tungsten carbide ribbing rollers

Our advantages of service:

aluminum trim coil color chart

tungsten carbide strips

welding thickness measurement